Crestron E-Control - Hitachi CP-X8170 User Manual

3.2 Crestron e-Control

The Main window as shown above is
displayed at first. However, if you have
enabled User Password on the Tools window
48), a dialog prompting you to enter
(
the password as shown on the right will be
displayed, and no operation is enabled until
you have entered the password. After entering
the preset password, the dialog disappears
and the Main window will be displayed.
As shown below, you can open a window by
clicking the corresponding tab at the top right
of the window.
Tab
Logout
Tools
Info
Contact IT Help
®
Logs out from e-Control
This tab appears only when User Password of the Tools window is
enabled.
Opens Tools window. (
Opens Info window. (
Opens Help Desk window. (
User Password dialog
Description
®
.
47)
49)
50)
3. Web Control
Tab
43