Maintenance; Recommended Maintenance Schedule - Toro 22167TE Operator's Manual

Maintenance

Note: Determine the left and right sides of the machine from the normal operating position.

Recommended Maintenance Schedule

Maintenance Service
Interval
Each Use
5 Hours
25 Hours
50 Hours
75 Hours
100 Hours
250 Hours
1
Change the engine oil after the first 5 operating hours.
Important
Refer to your engine owner's manual for additional maintenance procedures.
Maintenance Procedure
• Check the engine oil level. Refer to Checking the Engine Oil Level on page 16.
• Check the stopping time of the blade brake. The blade must stop within
3 seconds of releasing the control bar; if it does not, contact an Authorized
Service Dealer for repair.
• Remove grass clippings and dirt from under the housing. Refer to Cleaning
under the Housing on page 16.
• Clean the discharge tunnel and the discharge tunnel plug. Refer to Cleaning the
Discharge Tunnel and Plug on page 17.
• Inspect the air cleaner elements. Refer to Servicing the Air Cleaner on page 17.
• Check the blade and the engine mounting fasteners. Tighten loose fasteners.
• Clean the air cleaner elements; clean them more frequently in dusty operating
conditions. Refer to Servicing the Air Cleaner on page 17.
• Lubricate the pivot arms. Refer to Lubricating the Pivot Arms on page 19.
1
• Change the engine oil.
• Sharpen or replace the blade; maintain it more frequently if the edge dulls
quickly in rough or in sandy conditions. Refer to Maintaining the Blade on
page 18.
• Remove grass clippings and debris from under the belt cover. Refer to Cleaning
under the Belt Cover on page 19.
• Have an authorized engine servicing dealer check and adjust the flywheel brake
pad.
• Adjust the self-propel drive system. Refer to Adjusting the Self-propel Drive on
page 20.
• Inspect, clean, and adjust the spark plug; replace it if necessary. Refer to
Servicing the Spark Plug on page 20.
• Lubricate the gear case. Refer to Lubricating the Gear Case on page 21.
• Adjust the blade brake cable. Refer to Adjusting the Blade Brake Cable on
page 21.
• Service the wheels. Refer to Servicing the Wheels on page 21.
• Have an authorized engine servicing dealer check and adjust the idle speed,
check and adjust the valve clearance, and clean the fuel tank and filter.
• Replace the air cleaner elements; replace them more frequently in dusty
operating conditions. Refer to Servicing the Air Cleaner on page 17.
• Replace the spark plug. Refer to Servicing the Spark Plug on page 20.
• Have an authorized engine servicing dealer check for leaks in the fuel system
and/or a deteriorating fuel hose. Replace parts if necessary.
15
Refer to Changing the Engine Oil on page 20.