Replacing the Display Bezel
1 Follow the instructions in "Before You Begin" on page 9.
2 Align the display bezel with the display back cover, and gently snap it into
place.
3 Replace the display assembly (see "Replacing the Display Assembly" on
page 58).
CAUTION:
stray screws remain inside the computer. Failure to do so may result in damage to
the computer.
Display Panel
Removing the Display Panel
1 Follow the instructions in "Before You Begin" on page 9.
2 Remove the display assembly (see "Removing the Display Assembly" on
page 55).
3 Remove the display bezel (see "Removing the Display Bezel" on page 59).
4 Remove the camera module (see "Removing the Camera Module" on
page 77).
NOTE:
The touch-screen board is optional and may not be present in your
computer.
5 Remove the touch-screen board, if applicable:
Pull the pull-tab to disconnect the touch-screen board cable from the
a
connector on the touch-screen board.
60
Display
Before turning on the computer, replace all screws and ensure that no