Dell E2417H User Manual page 15

Power Management Modes
If you have VESA's DPM™ compliance display card or software installed in your PC, the
monitor can automatically reduce its power consumption when not in use. This is
referred to as Power Save Mode*. If the computer detects input from the keyboard,
mouse, or other input devices, the monitor automatically resumes functioning. The
following table shows the power consumption and signaling of this automatic power
saving feature.
VESA Modes Horizontal
Normal Active
operation
Active-off Inactive
mode
Switch off -
Energy Star
P
on
E
TEC
The OSD functions only in the normal operation mode. When any button is pressed in
the Active-off mode, the following message will be displayed:
NOTE: The message may be slightly different according to the connected input
signal.
NOTE: This monitor is ENERGY STAR
NOTE:
P : Power consumption of on mode as defined in Energy Star 7.0 version.
on
E : Total energy consumption in kWh as defined in Energy Star 7.0 version.
TEC
* Zero power consumption in OFF mode can only be achieved by disconnecting the
main cable from the monitor.
** Maximum power consumption with max luminance.
Vertical
Sync Sync
Active
Inactive
-
Power Consumption
16.4 W
51.0 kWh
Video Power
Indicator
Active White
Blanked White (blinking)
- Off
®
-compliant.
About Your Monitor
Power
Consumption
25 W (maximum)**
22 W (typical)
Less than 0.3 W
Less than 0.3 W
15
|