Auto Scan; Manual Tune; Drc (Dynamic Range Control) - Tangent PICO User Manual

Auto scan

If no DAB signal is found in your area, you may need to relocate your radio and
perform an auto scan.
To active auto scan, press MENU button and then turn TUNE/SELECT knob to
select 'Full scan', press TUNE/SELECT knob to confirm. You can also press SCAN
button on the unit to scan automatically.

Manual Tune

Sometimes, you might want a station with your appointed frequency, following
this order, it can be easily reached.
Press MENU button and then turn TUNE/SELECT knob to select 'Manual
1.
tune', press TUNE/SELECT knob to confirm.
2. The display will show the channel number and frequency list. Turn
TUNE/SELECT knob to browse and press TUNE/SELECT knob to select your
preferred radio channel.
3. If there is a multiplex corresponding to this channel and frequency, then the
display will show a tuning meter with the signal strength and the multiplex
name after a few seconds.
4. Press TUNE/SELECT knob to exit this order.

DRC (Dynamic Range Control)

You can set the level of compression stations to eliminate the differences in
dynamic range or sound level between radio stations. If you are listening to music
with high dynamic range in a noisy environment, you may wish to compress the
audio dynamic range.
1. Press MENU button and then turn TUNE/SELECT knob to select 'DRC', press
TUNE/SELECT knob to confirm.
9 (GB)