Safety Precautions
CAUTION
When install
As an indoor product, install
where the product can avoid
direct sunlight and protected from
snow and rain.
- Product failure can be caused.
Connect to the power after 30-
minutes of moving.
- Product failure can be caused.
Do not connect hot water to the
product.
- Product failure can be caused.
Do not tilt the product more than
45 degrees when moving.
- Product failure can be caused.
45º
The back and sides of the product
need more than 10cm spaces
apart from the wall for smooth
airflow.
- Product failure can be caused.
10Cm
After the installation, make sure
the hose's joint does not leak.
- If the screw is loosen, water leaks and
electric shock and property damage
can occur.
10Cm
9