Download Print this page
Makita DT01 Instruction Manual
Hide thumbs Also See for DT01:


Quick Links

Cordless Impact Driver



Summary of Contents for Makita DT01

  • Page 1 INSTRUCTION MANUAL Cordless Impact Driver DT01 008813...
  • Page 2: Specifications

    ENGLISH (Original instructions) SPECIFICATIONS Model DT01 Machine screw 4 mm - 8 mm (5/32" - 5/16") Capacities Standard bolt 5 mm - 14 mm (3/16" - 9/16") High tensile bolt 5 mm - 10 mm (3/16" - 3/8") No load speed (RPM) 0 - 2,400/min.
  • Page 3 result in personal injury. 25. Use power tools only with specifically 14. Do not overreach. Keep proper footing and designated battery packs. Use of any other battery packs may create a risk of injury and fire. balance at all times. This enables better control of the power tool in unexpected situations.
  • Page 4: Functional Description

    USD302-1 Tips for maintaining maximum battery life Symbols Charge battery cartridge before completely discharged. The followings show the symbols used for tool. ・ Always stop tool operation and charge the volts battery cartridge when you notice less tool ・ power. direct current Never recharge a fully charged...
  • Page 5 Changing the direction of release, have tool serviced at a Makita service center. rotation before the tool stops may damage the tool. When not operating the tool, always set the Turning on the front lamp •...
  • Page 6: Operation

    1. Bit High tensile bolt 2. Sleeve (ft.lbs) M10(3/8”) (58) M10(3/8”) (43) M8(5/16”) 008815 (29) M8(5/16”) NOTE: (14) If the bit is not inserted deep enough into the sleeve, • the sleeve will not return to its original position and the bit will not be secured.
  • Page 7: Using Holster

    Put the tool in the holster and lock it with the holster attachment for its stated purpose. button. If you need any assistance for more details regarding these accessories, ask your local Makita Service Center. Screw bits • Socket bits •...