Panasonic LUMIX DMC-GX80 Operating Instruction page 46

2. Getting Started/Basic Operations
Setting the operation methods of the front dial and rear dial
∫
> [Custom] > [Dial Set.]
MENU
[Assign Dial (F/SS)]
[Rotation (F/SS)]
[Exposure Comp.]
[Dial Operation Switch
Setup]
Assigns the operations of the aperture value and shutter speed
in Manual Exposure Mode.
[ F SS]:
Assigns the aperture value to the front dial, and the shutter
speed to the rear dial.
[ SS F]:
Assigns the shutter speed to the front dial, and the aperture
value to the rear dial.
Changes the rotation direction of the dials for adjusting the
aperture value and shutter speed.
[ ]/[
Assigns the Exposure Compensation to the front dial or rear
dial so that you can directly adjust it.
[ ] (Front Dial)/[
Sets the items to be assigned temporarily to the front/rear dials
when you press the function button to which [Dial Operation
Switch] is assigned.
[ ] ([Front Dial Operation])/[
•
Items that can be set are as follows.
–
[4K Photo Mode] (P118)
–
[Photo Style] (P188)
–
[Filter Effect] (P83,
–
[Aspect Ratio] (P192)
–
[AF Mode] (P97)
–
[Focus Mode] (P95)
–
[Highlight Shadow]
•
[Highlight Shadow] uses the two dials. It will be automatically
assigned to both of the dials when you assign it to either of
them.
46
]
] (Rear Dial)/[OFF]
] ([Rear Dial Operation])
–
[i.Dynamic]
–
[i.Resolution]
–
190) [Flash Mode]
–
[Flash Adjust.]
–
[Sensitivity]
–
[White Balance]
–
(P195) [Drive Mode]
(P196)
(P196)
(P159)
(P162)
(P112)
(P114)
(P134)