Panasonic LUMIX DMC-GX80 Operating Instruction page 258

10. Using the Wi-Fi function
When connecting via a wireless access point ([Via Network]):
On the camera
1
Select [Via Network].
•
Follow the connection procedure described on
access point.
On your smartphone
2
Turn on the Wi-Fi function.
3
Connect the smartphone to the wireless access point to which the camera is
connected.
4
Start "Image App".
When directly connecting the camera and smartphone ([Direct]):
On the camera
1
Select [Direct].
•
Select [Wi-Fi Direct] or [WPS Connection]
described on P285
¢ WPS is a function that allows you to easily set up a connection with a wireless LAN device
and make security-related settings. To check whether your smartphone supports the
function, refer to the operating instructions of the smartphone.
On your smartphone
2
Start "Image App".
For both iOS devices (iPhone/iPod touch/iPad) and Android devices
Terminating the connection
1
Set the camera to Recording Mode.
2
Select the camera's menu items to terminate the
Wi-Fi connection.
> [Setup] > [Wi-Fi] > [Wi-Fi
MENU
Function] > [Yes]
•
You can also terminate the connection by pressing [Wi-Fi]
on the camera.
3
On the smartphone, close "Image App".
(If you are using an iOS device)
On the screen of "Image App", press the home button to close the app.
(If you are using an Android device)
On the screen of "Image App", press the return button twice to close the app.
(P254)
to connect the camera to the smartphone.
(P254)
(P253)
P283 to connect the camera to a wireless
, and follow the connection procedure
¢
258