Operation - Amazon B0079JLXZ6 Operating Instructions Manual

OPERATION

Using the switch located on the unit, select one of the following settings by sliding the switch
either left or right.
I AUTO / ON:
This setting allows the shredder to be automatically started by inserting paper into the shred
opening. Always feed the paper in as straight as possible. When the paper has passed
through, the shredder will automatically stop.
O OFF:
This setting turns off all features of the shredder. For safety reasons, we recommend that
you leave the shredder in the "Off" position whenever the shredder is unattended or not in
use.
R REV (REVERSE):
In the unlikely event of a paper jam, the reverse setting can be used to help clear the cutters
of paper that has not passed through. Never attempt to clear a jam by using the reverse
function until you have emptied the wastebasket.
CD DESTROYER / RESET:
This feature destroys CDs into 4 individual pieces, rendering them inoperable. For further
details, please refer to the next page.
CONTINUED NEXT PAGE
4 ENGLISH
OPERATION
Features a CD/DVD Shredder:
Do not hold CD/DVD with finger through the center ring while feeding into the shredder.
Serious injury may occur. Never feed more than one credit card or CD/DVD at a time.
Lift safety cover to expose the dedicated feeding slot. Press the CD Destroyer/Reset button to
activate the shredding feature. Hold the disc by the edge and always feed one at a time into the
slot. You may need to gently push the disc down to engage the cutting blades. Release the button
once the entire CD has passed through and destroyed. Close cover when done shredding media.
Never shred large paper clips, window or insulated envelopes, continuous forms, newsprint,
bound pages (in example: notepads, checkbooks, magazines, etc...), transparencies,
laminated documents, cardboard, any items with adhesives, hard materials or plastic
(except Credit Cards and CDs).
This shredder will shred staples and small paper clips. It is recommended that you remove paper
clips whenever possible to extend the lifespan of your shredder.
Only shred credit cards by feeding them vertically into the middle of the entry, releasing
when shredding begins. Never feed more than one credit card at a time. DO NOT ACTIVATE
REVERSE FUNCTION WHILE SHREDDING CREDIT CARDS and CDs.
Overfeeding the shredder: Shredding beyond the specified sheet capacity can result in extensive
damage to the shredder. Overfeeding will strain the machine and quickly wear and break the
cutting blades and internal components.
Overheating with extended use: In the event that the shredder had shred continuously beyond
the maximum running time and overheated, the unit will automatically shut off. If this happens,
switch the shredder off for 30 minutes or longer before resuming normal operation.
ENGLISH 5