Important Safety Information - Danby DAC150ECB1GDB Owner's Use And Care Manual

Important Safety Information

READ AND FOLLOW ALL SAFETY INSTRUCTIONS
FOR YOUR SAFETY: Read these instructions carefully before operating the unit.
ELECTRICAL SPECIFICATIONS
1. All wiring must comply with local and national electrical codes and must be installed by a qualifi ed electrician. If you
have any questions regarding the following instructions, contact a qualifi ed electrician.
2. Check available power supply and resolve any wiring problems BEFORE installing and operating this unit.
3. This 115V or 230/208V air conditioner uses 11.7 or less nameplate amps and may be used in any properly wired,
general purpose household receptacle. See Table 1 for specifi cations for individual branch circuit.
4. For your safety and protection, this unit is grounded through the powercord plug when plugged into a matching wall
outlet. If you are not sure whether your wall outlet is properly grounded, please consult a qualifi ed electrician.
5. The wall outlet must match the 3-prong plug on the service cord supplied with the unit. DO NOT use plug adapters.
See Table 2 for receptacle and fuse information.
6. The rating plate on the unit contains electrical and other technical data. The rating plate is located on the right side of
the unit, above the powercord.
TABLE 1
Suggested Individual Branch Circuit
Nameplate Amps
11.7 or less
AWG- American Wire Guage
*Based on copper wire at 105°C (221°F) temperature
Recept and Fuse Types
Model
DAC150EC/UB1GDB
Rated Volts 125
Amps 15
Wall Outlet
Fuse Size 15
Time Delay Fuse
(or Circuit Breaker)
*AWG Wire Size
14
rating.
TABLE 2
DAC180EC/UB1GDB
240
15
15
DAC250EC/UB1GDB
250
30
20
Plug Type
2
Do not, under any
circumstances, cut,
remove, or bypass
the grounding prong.