Denon AVR-X3100W Model Information page 6


Rod antennas for Bluetooth/wireless LAN
Stand this antenna upright when connecting to a network via wireless
LAN, or when connecting to a handheld device via Bluetooth.
The antenna clip can be removed from the rear panel.
A Rotate the antenna clip 90 degrees to the left.
B Pull the antenna clip out towards yourself.
• The antenna clip is needed when transporting this unit. Keep it in a safe place.
• Attach the antenna clip by following the steps for removing it in reverse.
DISPLAY 2
Rear Panel (1 of 2)
RS-232C connector

Used to connect home automation controller devices fitted with
RS-232C connectors. Consult the owner's manual of the home
automation controller for more information about serial control of this unit.

Digital audio connectors (DIGITAL AUDIO)
Used to connect devices equipped with digital audio connectors.

NETWORK connector
Used to connect to a LAN cable when connecting to a wired LAN network.

REMOTE CONTROL jacks
Used to connect infrared receivers/transmitters in order to operate this
unit and external devices from a different room.
HOME
REAR PANEL 2
6