Safety - GBC 17P Installation & Operation Manual

ProCut 17P – Installation and Operating Instructions
1. s
aFety
Your safety, as well as the safety of others, is
important. Before you install or use the machine,
read and follow all the safety notices carefully in
this chapter. In this instruction manual, and on the
machine, you will find important safety notices
related to the use of the product. Observe all the
safety information provided.
Read all of the instructions and save these
instructions for further use. Also make sure you have
been fully trained before operating.
The safety alert symbol precedes each
safety notice in this manual. The symbol indicates a
potential personal safety hazard to you or others.
This safety alert symbol indicates a potential
electrical shock. It warns you not to open the
machine and expose yourself to hazardous voltage.
The following warnings are found on the equipment.
WarnInGs
• Do not attempt to service or repair the
machine.
• Do not open the machine. There are no
serviceable parts inside. Refer service to
qualified service personnel.
• Do not attempt to modify this equipment.
• Do not connect to an electrical supply or
attempt to operate until you have completely
read these instructions. Maintain these
instructions in a convenient location for future
reference.
• Entrapment hazard. Do not operate when
alone. More than one person is required to be
in the area when operating the machine.
• To guard against injury, the general safety
precautions must be observed when installing
and using the machine.
Page 1-1