Quick Index
c
d
(Make a call)
静 音
(Mute On)
a
(End a call)
Auto answer
Caller ID
10
Making calls
Making an external calls
Enter the phone number then press c or d.
Or:
Press c or d and then enter number.
Remind with friendliness:
You can also dial out by using the number stored in phonebook or redial list.
Accepting a call
Press c or d to accept an incoming call.
If the handset is in the base and the A U T O A N S W E R function is activated, the
handset will take a call automatically when you lift it out of the cradle.
Adjusting talking volume
You can press - + to adjust talking volume
Mute
Press 静 音 to deactivate the microphone during the talk with external line.
Screen display M U T E O N
Press 静 音 again to talk with external line again.
Ending a call
Press a to end a talk.
Activating/deactivating Auto answer
When this function is activated, when a call arrives you can simply lift the handset
out of the base without having to press the talk key c.
Press 菜 单 v ▲ ▼ P E R S O N A L S E T . OK v ▲ ▼ A U T O A N S W E R OK
v▲ ▼ Select ON / OFF OK
Caller ID
Requirements: you have applied the CID service.
When you get a call, the caller's phone nu mber will be displayed on your handset.
The caller's name and number will be both displayed if it is stored in the
phonebook
Remark:
The phone was made according to the national standards. However sometimes
the CID function can't be displayed properly for the reason of some special using
condition: e.g. connecting several phone on a single line or the PABX not a
standard appliance. Please contact with your local telecom service supplier.