Code Alarm CA 1551 Installation Manual page 8

8 VIOLET/BLACK
This wire provides a ( - ) 200mA output capable of driving relays. For Control of
optional accessories (i.e. Power Window/Sunroof, etc.).
To activate refer to the transmitter button configuration chart. Please refer to the
selectable options for timing.
9 LT GREEN/BLACK
This wire will supply a ( - ) 200mA pulse upon disarming the system. Locate the
factory perimeter alarm disarm wire from the key cylinder inside the drivers door.
Verification: This wire registers ground if the key is turned to the unlock
position in the driver's door cylinder.
Connect the LT GREEN/BLACK wire to the factory alarm disarm wire.
8
AUX 1
FACTORY DISARM OUTPUT ( - )
2010 Audiovox Electronics Corporation. All rights reserved.