Advertisement
Quick Links
ORICOM CUSTOMER SUPPORT
Oricom have a trained and dedicated team of Customer Support
Representatives, each with the knowledge and resources to assist in
answering your questions quickly and efficiently.
Oricom Support - Australia
For all product enquiries, troubleshooting or to discuss the range of Oricom
products, feel free to contact Oricom or visit our website for answers to
frequently asked questions.
02 4574 8888
Monday - Friday 8am – 6pm AEST
Email: support@oricom.com.au
www.oricom.com.au
Oricom Support - New Zealand
0800 674 266
Monday - Friday 11am - 7pm NZST
Email: support@oricom.co.nz
Ref: 22012020
Advertisement
Related Manuals for Oricom Babysense7
Summary of Contents for Oricom Babysense7
- Page 1 Oricom Support - Australia For all product enquiries, troubleshooting or to discuss the range of Oricom products, feel free to contact Oricom or visit our website for answers to frequently asked questions. 02 4574 8888 Monday - Friday 8am –...
- Page 2 Register of Therapeutic Goods (ARTG No. 97479) Babysense7 is intended for use as an Infant Apnoea Alarm. ALWAYS READ THE LABEL AND USER GUIDE, USE ONLY AS DIRECTED. Please retain your purchase receipt and attach to the back page of this...
-
Page 3: Table Of Contents
Installation ................5 Operation ................9 Troubleshooting Guide ............13 Express Warranty (Australia) ..........15 Need Help? If you need assistance setting up or using your Oricom Babysense7 now or in the future, call Oricom Product Support. Australia (02) 4574 8888 www.oricom.com.au Mon-Fri 8am – 6pm AEST... -
Page 4: Important Use And Safety Warning
Important Use And Safety Warning IMPORTANT USE AND SAFETY WARNING It is essential that all users of your Babysense7 monitor read and understand this user guide thoroughly before installing or using the product. This user guide contains detailed information on installation and operation of the Babysense7 monitor which all users need to be aware of to ensure that the monitor operates properly. - Page 5 • Follow the installation instructions carefully to ensure that it is installed securely and correctly. • Babysense7 is not a toy. Do not allow children of any age to play with it. • Do not operate vaporizer or ventilator directly towards the bed.
-
Page 6: General Information
• One control unit holder • One hanging hook • Two sensor pads • Two reuseable plastic cable ties Requires 4 AA size, 1.5 volt high quality Alkaline batteries (not supplied). If any items are missing from the pack, please call Oricom Customer Support. - Page 7 • Size of sensor pad is 216mm in diameter. Principle Of Operation Babysense7 continually detects baby's breathing movement rate, and will set off a sound and visual alarm if breathing movement stops for 20 seconds or if the breathing movement rate slows to below 10 breaths per minute.
-
Page 8: Installation
Installation Installation 1. Remove battery cover by inserting a flat screw driver into the opening recess and insert, in accordance with the markings, 4 new and identical size AA 1.5 volt high quality Alkaline batteries, close cover. Note: Please dispose of used batteries in accordance with local waste regulations. - Page 9 Installation PLEASE NOTE: The sensors shall be placed with the marking “THIS SIDE UP” facing upwards. Sensor pads (Under mattress) Control unit Top crib/bed view Top crib/bed view For babies not For crawling babies yet able to crawl Illustration 2 4.
- Page 10 Installation 5. Attach end(s) of the cord(s) to the outlets marked "SENSOR" on the back of control unit (as shown in illustration 4 and 5). When using one sensor pad, attach to any “SENSOR” outlet. PLEASE NOTE: Do not attach any cable to the blocked socket, marked "DO NOT USE".
- Page 11 Installation 7. Press control unit holder or hanging hook firmly into slot in back of control unit as shown in illustration 5 and 6. Illustration 6 Slot “Sensor” socket Sensor Do not use Sensor Blocked socket DO NOT USE Opening recess Battery cover...
-
Page 12: Operation
7 Operation Babysense7 is ready for operation and use once the installation is complete. To operate, follow the instructions below: • Place your baby in crib/cot. • Turn control unit on by pressing On/Off button. • Red control lights switch on briefly and a double click sound is heard. - Page 13 Technical malfunction In order to minimize technical problems, follow installation and operation instructions carefully. Potential environmental disturbances Due to the extreme sensitivity of Babysense7, it can be influenced by fans, wind, air conditioning, humidifier, cot mobile, ceiling projector etc. Such...
- Page 14 Babysense7 cannot be used for two infants in one cot. Never allow animals in the cot. Do not operate vaporizer or ventilator directly towards the cot. In the event of alarm In the event of alarm commence first aid, and seek the assistance of emergency services and/or medical advice.
- Page 15 • Follow the installation instruction carefully to ensure that it is installed securely and correctly. • Babysense7 is not a toy. Do not allow children of any age to play with it. Babysense7 requires no special treatment beyond replacing batteries when the battery indicator light illuminates.
- Page 16 Symbol Description Symbol Description Symbol for "SERIAL NUMBER". This symbol shall be accompanied Keep away from rain. by the manufacturer's serial number. DATE OF MANUFACTURE. This symbol shall be accompanied by a date to Temperature limitation. indicate the date of manufacture. Symbol for "MANUFACTURER".
-
Page 17: Troubleshooting Guide
Babaysense7. Do not use Babysense7 with a memory foam mattress. Delayed alarms • Performance test is not • Do not conduct a performance test by picking while taking the correct. - Page 18 - If the alarm does not sound within 20 seconds, connect one sensor only and continue using the product. Contact Oricom Support for further guidance. For all product related questions and warranty support, please call Oricom Customer Support team on (02) 4574 8888.
-
Page 19: Express Warranty (Australia)
Express Warranty (Australia) Oricom International Pty Ltd is the distributor of Babysense7 in Australia. This Express Warranty is provided by Oricom International Pty Ltd ABN 46 086 116 369, Unit 1, 4 Sovereign Place, South Windsor NSW 2756, herein after referred to as “Oricom”. - Page 20 No change to the conditions of this Express Warranty is valid unless it is made in writing and signed by an authorised representative of Oricom. Oricom will not be liable under this Express Warranty, and to the extent permitted by law will not be liable for any defect, loss, damage or injury arising out of or in connection with a: 1.
- Page 21 Please note that if a Customer Support Team member advises that your product does not qualify for return, this warranty does not apply to your product. Products that are authorised to be returned to Oricom in Australia must include all of the following: •...
Need help?
Do you have a question about the Babysense7 and is the answer not in the manual?
Questions and answers