Kenwood HCG700 Instructions For Use - Installation Advice page 11
Built-in cooking hob
Table of Contents
CORRECT REPLACEMENT OF THE BURNERS
It is very important to check that the burner flame spreader "F" and the cap "C" have
been correctly positioned (see figs. 3.1 and 3.2 ).
Failure to do so can cause serious problems.
In appliances with electric ignition, check that the electrode "S" (fig. 3.1) is always clean
to ensure trouble-free sparking.
The probe must be very carefully cleaned.
C
F
S
Fig. 3.1
Fig. 3.2
11
Table of Contents
Need help?
Do you have a question about the HCG700 and is the answer not in the manual?