Rear Panel; Attaching The Toroidal Ferrite Core Of The Main Unit - Samsung HT-FS9200 User Manual

Rear Panel

* FM ANTENNA
AUX IN
LAN TERMINAL
1 2
HDMI OUT HDMI IN
HDMI OUT HDMI IN
* Connecting the FM Antenna
1. Connect the FM antenna supplied to the FM ANT Jack.
2. Slowly move the antenna wire around until you find a location where reception is good, then fasten it to a wall or
other rigid surface.
| NOTES |
\
Maintain a minimum of 10 cm of clear space on all sides of the home cinema to ensure adequate ventilation. Do not
obstruct the cooling fan or ventilation holes.
\
This product does not receive AM broadcasts.

Attaching the Toroidal Ferrite Core of the Main Unit

For the Speaker Cable
1. Open the ferrite core by pulling up the tab.
2. Make a loop twice in the Speaker Cables.
3. Attach the ferrite core to the arranged cables and press to close it
until you hear a click.
• Insert the ferrite core as close to the main unit as possible.
For the Power Cord
If you attach a Toroidal ferrite core to the power cord, it will help to prevent
RF interference from radio signals.
1. Pull the fixing tab of the Toroidal ferrite core to open it.
2. Make a loop twice in the power cord.
3. Attach the Toroidal ferrite core to the power cord as the figure shows
and press it until it clicks.
AUX IN FM ANT
SPEAKERS OUT
LAN
L FRONT
L
OPTICAL
SUBWOOFER FRONT
R
R
DIGITAL
IMPEDANCE : 3
AUDIO IN
EXTERNAL DIGITAL AUDIO IN (OPTICAL)
SPEAKER OUTPUT
CONNECTORS
FM ANT
OPTICAL
DIGITAL
AUDIO IN
COOLING FAN
POWER
POWER CORD
SPEAKERS OUT
FRONT L
SUBWOOFER FRONT
R
IMPEDANCE : 3
POWER
11
English
|