HANNspree HP247HJB User Manual page 15

LOW BLUE MODE
OSD SET UP
LANGUAGE
H-POSITION
V-POSITION
TIME OUT
TRANSPARENCY
RESET
AUTO CONFIG
AUTO COLOR
RESET
EXTRA
INPUT SELECT
MUTE
VOLUME
DDC/CI
Move the cursor to the Low Blue Mode option and select it.
Select 「 LANGUAGE」 option to change the language of the OSD. Enter the
option and select a language. [Reference only, the OSD Language depends
on the selected model]
Select 「H-POSITION」 option to adjust the horizontal position of the OSD.
Enter the option and adjust the level.
Select 「V-POSITION」option to adjust the vertical position of the OSD.
Enter the option and adjust the level.
Select 「TIMEOUT」 option to set the OSD time out from 5 to 120 seconds.
Enter the option and adjust the level.
Select 「TRANSPARENCY」 option to adjust the transparency of the OSD.
Enter the option and adjust the level(0,25,50,75,100).
The auto config function is used to optimize the 「H-POSITION」,
「V-POSITION」,「CLOCK」,and 「PHASE」. [For VGA Input only]
The auto color function is used to optimize the 「COLOR」. [For VGA
Input only]
Select the 「RESET」option to reset to the monitor's default setting. This
will erase the current settings. Enter the option and select On or Off.
The input select function is to enter Source selections. (Selections include
VGA, HDMI, etc. The actual selections may vary depending on the models.
This function is only available in models with digital inputs)
Select the「MUTE」option to switch the function On or Off. [The
availability of this function depends upon the selected model. Adjusting the
volume while muted cancels Mute mode.]
Select the 「VOLUME」 option to change the volume level. Enter the option
and adjust the level. [This function applies only to models with
incorporated audio.]
● By high volume, risk of hearing damage exists.
Select the 「DDC/CI」option to switch the function On or Off. [Dual input
mode optional]
15
User's Manual