Power Management; Screen Blank State; Putting The Computer To Sleep Or Shutting; It Down - Lenovo YOGA 500-14ISK Hardware Maintenance Manual

Power management

Note: Power management modes are not supported for APM operating system.
To reduce power consumption, the computer has three power management
modes: screen blank, sleep (standby), and shut down.

Screen blank state

If the time set on the "Turn off monitor" timer in the operating system expires,
the LCD backlight turns off. You can also turn off the LCD backlight by
pressing
To end screen blank state and resume normal operation, press any key.
Putting the computer to sleep or shutting it down
When you have finished working with your computer, you can put it to sleep or
shut it down.

Putting your computer to sleep

If you will be away from your computer for only a short time, put the computer to
sleep. When the computer is in sleep mode, you can quickly wake it to resume use,
bypassing the startup process. To put the computer to sleep, do one of the following:
• Close the display lid.
• Press the Power button.
• Open the start menu, and then select Power
Attention: Wait until the power indicator light starts blinking (indicating that
the computer is in sleep mode) before you move your computer. Moving your
computer while the hard disk is spinning can damage the hard disk, causing
loss of data.
To wake the computer, do one of the following:
• Press any key on the keyboard.
• Press the Power button.

Shutting down the computer

If you are not going to use your computer for a long time, shut it down. To shut
down your computer:
• Open the start menu, and then select Power
• Press and hold or right-click the Start button in the lower-left corner and
F9.
select Shut down or sign out → Shut down.
Related service information
→ Sleep.
→ Shut down.
25