Page 1
Network Camera Operation Manual DC-D2233WHX Powered by...
Page 2
Before reading this manual This is a basic operation manual for use of an IDIS network camera. Users who are using this product for the first time, as well as users with experience using comparable products, must read this operation manual carefully before use and heed to the warnings and precautions contained herein while using the product.
Page 3
Before reading this manual Safety Precautions WARNING RISK OF ELECTRIC SHOCK DO NOT OPEN WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. Important Safeguards 1.
Page 4
IDIS Co., Ltd. reserves all rights concerning this manual. Use or duplication of this manual in part or whole without the prior consent of IDIS Co., Ltd. is strictly prohibited. Contents of this manual are subject to change without prior notice for reasons such as functionality enhancements.
- The DirectIP™ NVR also allows you to control all camera settings directly from the NVR, without the Launch the IDIS Discovery program and from the list, need for a computer. select a camera whose protocol you wish to change.
Part 1 - Remote Setup Remote Setup Launch the IDIS Discovery program and then from the main screen, select a network camera whose settings you wish to change. Click on the Setup icon. Select Remote Setup from the Setup menu to load the Remote Setup screen.
There may be some more settings that cannot be changed, too. If you want to change those settings, connect to the camera by using the IDIS Discovery program. Change the camera’s system information, add users/...
Part 1 - Remote Setup • Setup Date/Time - Load Default Setup: Restores all settings other than Date/Time to their factory defaults. Select Include Network Setup to load default network settings as well. For more information on network setup, refer to the Network on page 12. - Import Setup: Open a setup file and apply its settings to the camera.
Part 1 - Remote Setup User/Group • User/Group settings can only be configured by users belonging to the Administrator group. • There is no default password for the Administrator group's admin user. • Standard groups (Administrator, Operator, and User) cannot be edited or deleted. Authorities assigned here apply identically to ONVIF protocol user groups.
Part 1 - Remote Setup Network • Type: Select the type of network you are using. If this option has been changed, Remote Setup will terminate after applying the current settings. - Manual: Select if using a static IP. You will then be able to configure the related settings manually.
Server’s help desk information will be shown in the Help Desk fields next time you enter the FEN setup The FEN Server operated by IDIS is a service to its screen. clients and may go offline without notice for server...
Record, and Search ports are enabled by default and cannot be disabled. By enabling IDIS Web and RTSP ports, you will be able to use the IDIS Web program or a media player that supports RTSP (Real-Time Streaming Protocol) service to connect to the camera.
Video > Streaming if a network Port Number/ (If Use HTTPS has been enabled, bandwidth limit has been set. enter https instead of http). Camera's IDIS Web port number and RTSP port number must be configured correctly in order to establish a connection this way.
Part 1 - Remote Setup Security • SSL: Select this option to enable SSL (Secure Sockets Layer). Enabling this option applies SSL protocol protection on data transmitted out. However, programs and systems that do not support SSL will not be able to connect to the camera. If this option has been changed, Remote Setup will terminate after applying the current settings.
Part 1 - Remote Setup Video IEEE 802.1X Select the IEEE 802.1X option to enable IEEE 802.1X network connection authentication. Configure Camera, Streaming, Webcasting, MAT, and Privacy Masking options. • Certificates: Upload a certificate or a private key. You may be prompted to enter a password for the private key.
Page 18
Part 1 - Remote Setup • Frame Rate: Set the frame rate of image sesor. • Mirroring: Select Horizontal Reverse or Vertical Selecting 30.00 ips limits the frame rate of images for Reverse to flip the image horizontally or vertically. streaming under Video >...
Page 19
Part 1 - Remote Setup White Balance Exposure Configure White Balance settings. Configure Exposure settings. • Mode: Set the white balance mode. • AE Target Gain: Specify exposure compensation’s target gain. Exposure is compensated automatically - Auto: Select to adjust the white balance based on the specified target gain.
Page 20
Part 1 - Remote Setup • Anti-Flicker: If the lights in the area where the Day & Night camera is located use alternating current, specify Configure Day & Night settings. the frequency of the lights to minimize flickering. Matching the frequencies can reduce flickering. (NTSC: 60Hz, PAL: 50Hz) •...
Page 21
Part 1 - Remote Setup • IR Cut Filter: IR Cut Filter blocks out the infrared Miscellaneous spectrum. You can ensure clear images at all times by Configure Miscellaneous settings. blocking out the infrared spectrum in high-lighting conditions and allowing the infrared spectrum to pass through in low-lighting conditions.
Part 1 - Remote Setup Streaming Select On and then specify the streaming area’s resolution. • Primary/Secondary/Tertiary/ Quaternary: Multistreaming is supported (priority: Primary > Secondary > Tertiary > Quaternary). Enable/disable streaming use. • Compression: Choose the streaming compression - Resolution Limit: Indicates the maximum method.
Part 1 - Remote Setup Webcasting Select the MAT option to use the MAT (Motion Adaptive Use the webcasting service to view live images from the camera on a web site. Transmission) feature during video transmission and recording. • HTML Code: Copy and paste the html code shown on •...
Part 1 - Remote Setup • Daytime: Set the daytime range. The camera will Privacy Masking consider the remaining time range as the nighttime. This function is interworking with the setting of Event Select Privacy Masking to set up a privacy mask over >...
Part 1 - Remote Setup Audio Event Action Configure audio in/out settings. Designate event detection alert actions. In/Out Alarm out Select Alarm Out to enable alarm out. • Audio Codec: Select an audio codec. • Input: Select an option and then adjust the volume. •...
Select Email to send out emails. Select Remote Callback to send callback messages to a remote system. • Not supported from the IDIS Web program. • The camera must be registered to the remote system in order to use the Remote Callback feature.
Part 1 - Remote Setup Audio Alarm FTP Upload Select Audio Alarm to generate audio. Select FTP Upload to upload .jpg image of the event detected to an FTP server. • List: Displays a list of audio files to playback. Click •...
Page 28
Part 1 - Remote Setup - Resolution/Quality: Choose the resolution and quality of the images to upload to the FTP server.Range of resolution settings you can use here can vary depe nding on the resolution setting applied under Video > Streaming. - Base File Name: Enter a name for the files to be uploaded to the FTP server and then choose file identification options.
Part 1 - Remote Setup Record Schedule Select the Schedule tab and set up a recording schedule. Select Record to record video on the SD card. First, make sure that an SD card (Class 6 or higher) has been • Mode: Choose a recording mode. properly inserted.
Page 30
Part 1 - Remote Setup - Preference: Designate recording stream priority. Settings Select the Settings tab and configure recording Recording using the Time-Lapse/ settings. Pre-Event and Event streams Recording designated above. Record from the remote program using the designated recording streams.
• Recordings saved on the SD card can be searched and played back from the IDIS Solution Suite Compact program or remotely from the remote program. For more information, refer to each program's operation manual.
• Not supported from the IDIS Web program. • The camera must be registered to the remote • Max Detect Count: Select the number of faces to system in order to use the Remote Callback be detected.
• Not supported from the IDIS Web program. • The camera must be registered to the remote system in order to use the Remote Callback feature.
Page 36
Action must be configured correctly in order to send out emails and messages. • Remote Callback is not supported on IDIS Web. • The camera must be registered to the remote system in order to use the Remote Callback feature.
– Tools → Internet Options → Advanced → Security → Use TLS 1.0 (select) • If connecting by entering an IP address and a port number, you can connect by entering just the IP address if IDIS Web connection port number has been set to 80 (443 when entering https).
Page 38
Run as administrator option. Otherwise, certain IDIS Web functions might not be available. • When running IDIS Web, the bottom section of the screen may get cut off if the address bar or the status bar is shown.
2013-05-29 16:25:22 2013-05-29 16:25:22 Press to terminate IDIS Web. Place the mouse pointer on the logo to check IDIS Web's version. TYPE 1 Displays the current time. Click to view the video in full screen. Press the ESC key on the keyboard to return to the previous screen.
Page 40
Part 2 - IDIS Web Shows login information. Indicates the camera's number. Used to control zoom at a remote location. Used to adjust live video quality. Click to control the alarm out device connected to the camera. Event status window at the bottom of the screen displays a list of events detected at remote locales.
113.49 NC-D320-IP & Press to terminate IDIS Web. Place the mouse pointer on the logo to check IDIS Web's version. TYPE 1 Displays time information of the video recording from the remote locale. Click to view the video in full screen. Press the ESC key on the keyboard to return to the previous screen.
Page 42
Part 2 - IDIS Web Click to switch over to Web Live mode. TYPE 1 Shows login information. Indicates the camera's number. Zoom in or out on the video. Adjust image brightness. Apply image filters (Sharpen, Blur, Equalizer, Interpolation, and Revert) to the images.
Page 43
Part 2 - IDIS Web Right-click on the screen to display the pop-up menu. • Change Camera Title: Used to change the camera's name. Renaming the camera in Web Search mode does not affect the camera's name on the remote system. If no name is entered for the camera, the name used at the remote locale is shown on the screen.
Part 3 - Appendix Setup Menu Tree (Remote Setup) Remote Setup Quick Setup System Network Video Audio System General Date/Time User/Group Network IP Address Port/QoS Bandwidth Control Security IEEE 802.1X Video Camera Streaming Webcasting Privacy Masking Audio In/Out Event Action Alarm Out Email Remote Callback...
Part 3 - Appendix Index Network Bandwidth Limit Admin/Watch/Recording/Search Ports ONVIF Protocol Camera Name Quality Compression Resolution Date/Time RTSP Port DSCP FEN Name FEN Server Frame Rate Time Sync IPFiltering Use FEN Use HTTPS User/Group Use UPnP V1.1...
Page 46
IDIS Co., Ltd. For more information, please visit at www.idisglobal.com...