Asus E3 PRO GAMING V5 User Manual page 27

4. CPU, water pump, and chassis fan connectors (4-pin CPU_FAN; 4-pin W_PUMP;
4-pin CHA_FAN1~3)
Connect the fan cables to the fan connectors on the motherboard, ensuring that the
black wire of each cable matches the ground pin of the connector.
E3 PRO GAMING V5 Fan connectors
• Do not forget to connect the fan cables to the fan connectors. Insufficient air flow
inside the system may damage the motherboard components. These are not jumpers!
Do not place jumper caps on the fan connectors!
• Ensure that the CPU fan cable is securely installed to the CPU fan connector.
• The CPU_FAN connector supports a CPU fan of maximum 1 A (12 W) fan power.
• W_PUMP function support depends on water cooling device.
• The CPU_FAN connector and CHA_FAN connectors support the ASUS FAN Xpert 3
feature.
• The CPU fan connector detects the type of CPU fan installed and automatically
switches the control modes. To configure the CPU fan's control mode, go to
Advanced > Monitor > Q-Fan Configuration > CPU Q-Fan Control item in BIOS.
• The chassis fan connectors support DC and PWM modes. To set these fans to DC
or PWM, go to Advanced > Monitor > Q-Fan Configuration > Chassis Fan 1/2/3
Q-Fan Control items in BIOS.
ASUS E3 PRO GAMING V5
A
CPU_FAN W_PUMP
A
B
D
C
CHA_FAN3 CHA_FAN2
D
GND
CHA FAN PWR
CHA FAN IN
CHA FAN PWM
E
B C
CHA_FAN1
E
1-19