Advanced - Axis P3905-R User Manual

AXIS P3905-R Network Camera
About PTZ (Pan Tilt Zoom)
3. Click Remove.
About tour recording
How to create a recorded tour
Note
Only the name of the recorded tour and pause between runs can be modified. Starting a new recording will overwrite the
existing guard tour.
1. Go to PTZ > Guard Tour and click Add.
2. Select Create a record tour and click OK.
3. Type a name.
4. Specify the pause length between runs.
5. Click to start recording the pan/tilt/zoom movements.
6. When satisfied, click
7. Click OK.
8. Activate the recorded tour from the live view, the guard tour pages or through events. For more information see the
online help

Advanced

About advanced PTZ settings
Advanced PTZ settings can be configured under PTZ > Advanced > Controls.
The Panel Shortcut Command Buttons list shows the user-defined buttons that can be accessed from the Live View page's Ctrl
panel. These buttons can be used to provide direct access to commands issued using the VAPIX® application programming interface.
Click Add to add a new shortcut command button.
The following PTZ controls are enabled by default:
• Pan control
• Tilt control
• Zoom control
To disable specific controls, deselect the options under Enable/Disable controls.
If using multiple view areas, deselecting a control will only disable the control in the selected view area.
Note
Disabling PTZ controls will not affect preset positions. For example, if the tilt control is disabled, the product can still move to
preset positions that require a tilt movement.
.
.
28