Hardware Overview; Connectors And Buttons - Axis P1435–LE User Manual

Hide thumbs Also See for P1435–LE:

Table of Contents

AXIS P1435–LE Network Camera

Hardware Overview

microSD card slot

I/O connector

Control button

Network connector

Status LED indicator

Part number (P/N) & Serial number (S/N)

For technical specifications, see page 64.

Network Connector

RJ45 Ethernet connector with Power over Ethernet (PoE).

NOTICE

TICE

Due to local regulations or the environmental and electrical conditions in which the product is to be used, a shielded network

cable (STP) may be appropriate or required. All cables connecting the product to the network and that are routed outdoors

or in demanding electrical environments shall be intended for their specific use. Make sure that the network devices

are installed in accordance with the manufacturer's instructions. For information about regulatory requirements, see

Electromagnetic Compatibility (EMC) on page 2 .

I/O Connector

Use with external devices in combination with, for example, tampering alarms, motion detection, event triggering, time lapse recording

and alarm notifications. In addition to the 0 V DC reference point and power (DC output), the I/O connector provides the interface to:

•

Digital output – For connecting external devices such as relays and LEDs. Connected devices can be activated by the

VAPIX® Application Programming Interface, output buttons on the Live View page or by an Action Rule. The output will

show as active (shown under System Options > Ports & Devices) if the alarm device is activated.

Table of Contents

Show Quick Links

Table of Contents