Hyundai JE 702P Instruction Manual page 29

Fig. 1
• Before using it, you must check the filter; if it is found to have cracks
or to be damaged, the juicer shall not be used, and please phone the
KingClean's national unified customer-servicing hot-line to get in touch
with the company, or to get in touch with our local after-sale service
center. Put the filter into the juice collector, and rotate it to make sure
that it is placed to its position fig.3 (1). Ensure that the filter has been
cramped in the joint (a sound of click is heard).
• Hold the upper cover with the hand, and put it to its position from above
the filter (2).
• Fasten the two fastening cramps, and make them locked to their
positions (sound of click can be heard) fig. 4 (1), then align the concave
groove of the propeller with the convex flange in the feeding tube, and
slide the propeller into the feeding tube (2).
• Ensure that the two fastening cramps on both sides of the upper cover are locked to their
positions.
Place the juice cup under the tube mouth fig.5.
• In order to prevent splashing, or in case the juice is intended to be put in refrigerator, the
upper cover of the juice cup may be put on.
• During pouring the juice into a glass cup, in order to separate the foam from the juice, it is
possible to slide the foam retainer plate into the juice cup.
Note: If you want to have a juice with foam, don't put retainer plate in.
Fig.4
Fig. 5
29 / 40
Fig. 2
ENG