Related Manuals for Equinox Systems MicroPar RGBW
Summary of Contents for Equinox Systems MicroPar RGBW
- Page 1 MicroPar RGBW MidiPar RGBW User Manual Order codes: MicroPar RGBW - EQLED130 MidiPar RGBW - EQLED131...
-
Page 2: Safety Advice
NO USER SERVICEABLE PARTS. pulling the power-cable. • This lighting fixture is for professional use only - it is • Make sure that the available mains supply voltage is not designed for or suitable for household use. The between 100~240V AC, 50/60Hz. product must be installed by a qualified technician in accordance with local territory regulations. The safety of • Make sure that the power cable is never crimped or the installation is the responsibility of the installer. The damaged. Check the equipment and the power cable fixture presents risks of severe injury or death due to fire periodically. hazards, electric shock and falls. • If the equipment is dropped or damaged, disconnect the • Warning! Risk Group 2 LED product according to mains power supply immediately and have a qualified EN 62471. Do not view the light output with optical engineer inspect the equipment before operating again. instruments or any device that may concentrate the beam. • WARRANTY: One year from date of purchase. OPERATING DETERMINATIONS If this equipment is operated in any other way, than those described in this manual, the product may suffer damage and the warranty becomes void. Incorrect operation may lead to danger e.g: short-circuit, burns and electric shocks etc. Do not endanger your own safety and the safety of others! Incorrect installation or use can cause serious damage to people and/or property. www.prolight.co.uk MicroPar RGBW/MidiPar RGBW User Manual... - Page 3 • 3-Pin XLR input/output • Captive power connection • Fan cooled • 3-Pin XLR input/output • Fan cooled Specifications Specifications Power consumption Power consumption Power supply 100~240V, 50/60Hz Power supply 100~240V, 50/60Hz Fuse F3A 250V Fuse F3A 250V Dimensions 153 x 145 x 95mm Dimensions 250 x 250 x 155mm Weight 0.5kg Weight 1.26kg Order codes EQLED130 Order codes EQLED131 250mm 155mm 145mm 95mm www.prolight.co.uk MicroPar RGBW/MidiPar RGBW User Manual...
-
Page 4: Technical Specifications
0 00~b. 2 55 B 150-199 Colour fade in/out o. 0 00~o. 2 55 W Colour change mode CC00~CC99 200-255 Sound active Colour fade mode 000-255 Chase/fade speed (slow to fast) CP00~CP99 Auto mode 000-255 Red (0-100%) dE00~dE99 Sound active mode 000-255 Green (0-100%) bEbE DMX mode 4CH, 8CH 000-255 Blue (0-100%) Address setting 000-255 White (0-100%) d001~d512 www.prolight.co.uk MicroPar RGBW/MidiPar RGBW User Manual... -
Page 5: Master/Slave Mode
“ENTER” button and repeat for green ( ), blue ( ) and white ( Value: 000 - 255 (000 = low brightness, 255 = high brightness) To exit out of any of the above options, press the “MENU” button. Master/slave mode: To set the master unit, press the “MENU” button on the rear of the master unit to select your desired program (sound active, auto, static colour or colour fade). d001 To set the other units in slave mode, press the “MENU” button on the rear of the unit to show on the LED display and press the “ENTER” button to confirm the setting. The units will now run in sequence with the master unit. To exit out of any of the above options, press the “MENU” button. Please ensure that all slave units are set to the same DMX channel mode as the master unit. Sound active mode: bEbE To access the sound active mode, press the “MENU” button on the rear of the unit to show on the LED display. The unit will now respond to sound. To exit out of any of the above options, press the “MENU” button. www.prolight.co.uk MicroPar RGBW/MidiPar RGBW User Manual... -
Page 6: Dmx Setup
DATA cable (DMX cable) requirements (for DMX operation): This fixture can be controlled via DMX-512 protocol. The DMX address is set on the back of the unit. Your unit and your DMX controller require a standard 3-pin XLR connector for data input/output, see image below. Further DMX cables can be purchased from all good sound and lighting suppliers or Pro Light Concepts dealers. Please quote: CABL10 – 2m CABL11 – 5m CABL12 – 10m Also remember that DMX cable must be daisy chained and cannot be split. www.prolight.co.uk MicroPar RGBW/MidiPar RGBW User Manual... -
Page 7: Line Termination
5-pin XLR (socket) 3-pin XLR (socket) Pin 1: GND (screen) Pin 1: GND (screen) Pin 2: Signal (-) Pin 2: Signal (-) Pin 3: Signal (+) Pin 3: Signal (+) Pin 4: N/C Pin 5: N/C www.prolight.co.uk MicroPar RGBW/MidiPar RGBW User Manual... - Page 8 Operating instructions & WEEE notice Correct Disposal of this Product (Waste Electrical & Electronic Equipment) (Applicable in the European Union and other European countries with separate collection systems) This marking shown on the product or its literature, indicates that it should not be disposed of with other household wastes at the end of its working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources. Household users should contact either the retailer where they purchased this product, or their local government office, for details of where and how they can take this item for environmentally safe recycling. Business users should contact their supplier and check the terms and conditions of the purchase contract. This product should not be mixed with other commercial wastes for disposal. www.prolight.co.uk MicroPar RGBW/MidiPar RGBW User Manual...