LASA LS 3-A Installation, Use & Maintenance Manual page 29

MANUALE DI INSTALLAZIONE, USO E MANUTENZIONE
INSTALLATION, USE AND MAINTENANCE MANUAL
WORKING PLACE AND RESIDUAL RISKS
After that a skilled worker has properly installed and switched on the appliance, the dish-
washer can be employed following the instructions of use hereinafter described and the
procedures explained by the technician in charge of testing it after installation.
The working place is in front of the dishwasher. The front panel permits both to set the was-
hing program and to control the appliance operation, with no need to access the interior of
the appliance.
The door leaf opening permits to collect washed items by extracting the apposite baskets,
with no need to access the tank. It is advisable to insert baskets after loading them.
LS 4 and LS 3 models with support (optional) enable easier loading and unloading opera-
tions, thus avoiding body bending and twisting (observe occupational safety regulations in
force, see Directive 90/269/EEC enforced in Italy by the Law Decree n. 626/94).
CAUTION : Appliance with hot surfaces!
During ordinary operation, the external areas of the dishwasher can reach high temperatu-
res, depending on the type of washing cycle. In addition, the tableware items are very hot
after a rinsing cycle with hot water, therefore operators must wear thermal gloves.
If the abovementioned precautions have not been adopted, the manufacturer dis-
claims any responsibilities.
15