Recommended Measures To Secure; The Tv - Sony Bravia KD-55X720E Operating Instructions Manual

Recommended Measures to Secure

the TV

Consider the following measures when
securing your TV to a Stand (not supplied).
1
Secure the Stand for the TV.
Make sure the Stand can adequately
support the weight of the TV. Use
two angle braces (not supplied) to
secure the Stand.
For each angle brace use the
appropriate hardware to:
 Attach one side of the angle brace to
the wall stud.
Attach the other side to the Stand.

2
Secure the TV to the Stand.
Use the optional hardware listed as
follows (not supplied):
 M6 machine screws (screwed into the
TV's rear cover).
A screw or similar (attach it to the

Stand).
Rope or chain (strong enough to

support the weight of the TV). Make
sure that there is no excess slack in the
rope or chain.
8 US
Angle braces
(not supplied)
Stand
Screw hole on the rear cover
M6 machine screw
(not supplied)
Rope or chain (not supplied)
1 2
Screw
(not supplied)
The length of the M6 machine screw
differs depending on the rope or chain
diameter. Please refer to below
illustration.
8 mm - 12 mm
Rope or chain
TV's rear cover
Screw M6