Table of Contents
Advertisement
Quick Links
1.
Antenna
2.
Down Button
3.
Up Button
4.
LCD
5.
Mode Button
6.
Bluetooth/Band Selector
7.
Auxiliary Jack
8.
Volume On/Off Knob
9.
Microphone
10. Micro USB Recharge Port
11. PTL Microphone
12. PTL (Press to listen) selector
When the headset is turned on, all settings are resumed to the last (previous) settings.
For Australian users, 9 kHz is recommended.
To select 9 or 10 kHz for AM, the procedure is as shown here below:
Keep unit in OFF position.
!
!
During time setting mode, press BT/Band button (6) for 2 seconds.
!
9 kHz will be shown on the display.
MODEL NUMBER: ABA940
DIGITAL AM / FM STEREO HEADPHONE RADIO WITH BLUETOOTH, PTL
& AUX-IN JACK
USER MANUAL
Advertisement
Table of Contents
Related Manuals for Bullant ABA940
Summary of Contents for Bullant ABA940
- Page 1 MODEL NUMBER: ABA940 DIGITAL AM / FM STEREO HEADPHONE RADIO WITH BLUETOOTH, PTL & AUX-IN JACK USER MANUAL Antenna Down Button Up Button Mode Button Bluetooth/Band Selector Auxiliary Jack Volume On/Off Knob Microphone 10. Micro USB Recharge Port 11. PTL Microphone 12.
- Page 2 Insert Battery Turn off the headset. Open the battery door, insert 3 “AAA” sized batteries. Close the battery door. Rechargeable Lithium Batteries are also available. Bullant part number (ABABATT), ask instore for details. Charging time is 4 hours (approx). NOTE: Rechargeable AAA batteries cannot be charged in or by the device. Rechargeable batteries to be charged externally.
- Page 3 Tap the BT/Band (6) button to toggle between FM/AM/BT Setting. Select Bluetooth (••••) to activate the function. In your Bluetooth device, seek ABA940 and pair. After paired, “- on -” is shown on the LCD. To disable Bluetooth function, press and hold the BT/Band (6) button for 2 seconds. OFF will shown on the display.
- Page 4 Slide the muffs up or down to adjust for a firm, comfortable fit. Ensure the cushions seal tightly against your head with no interference from foreign objects between the ear cup and your head (such as pencils or eyeglass temple arms). Spread the ear cups only enough to clear the ears.
- Page 5 use the headset under a high temperature or high humidity environment as it may damage the receiver. Exposure to direct sunlight in places where may cause the case of the unit to warp or malfunction. The temperature should not exceed + 55℃. This product may be adversely affected by certain chemical substances.
- Page 6 Size Range of the Headband S, M and L ATTENUATION TABLE Frequency (Hz) 1000 2000 4000 8000 MF (dB) 17.5 15.2 20.8 26.0 34.0 31.4 35.3 33.6 SHF (dB) APV (dB) 13.3 11.5 18.0 23.3 30.5 26.8 314.9 28.0 SNR = 28 dB H-value = 29 dB M-value = 26 dB L-value = 19 dB...
- Page 7 FAX: 0 3 – 8 587 8 866 Mon-‐Fri 9 am – 5 pm A EST. ...
Need help?
Do you have a question about the ABA940 and is the answer not in the manual?
Questions and answers