Installation Instructions For The Flat Panel Support Bracket - Changhong Electric UHD42C5500ISX2 Operation Manual

Installation Instructions for the Flat Panel Support Bracket

1. The flat panel can easily topple over due to external force, as shown in the following
figure, which should be prevented.
2. First, remove 2 screws from on the rear cover. Then, It is required to install 2 brackets
and 2 screws from the accessory bag on the rear cover of the flat panel.
Bracket×2
3. Finally, the flat panel is assembled as shown in the following figure to prevent from
toppling over due to any external force.
Remarks:
1. Caution: Pulling, pushing, or climbing on the TV may cause the TV to fall.
In particular, ensure your children do not hang over or destabilize the TV; doing so
may cause the TV to tip over, causing serious injuries or death. Follow all safety
precautions provided on the included Safety Flyer.
2. The flat panel can only be placed on a flat surface object with a surface area larger
than that of the flat panel. Both supporting brackets on either side must rest on the flat
surface and the two brackets must be fastened with screws to the left and right
corners of the flat panel's rear cover respectively.
3. The above figures are for reference only, and the physical flat panel shall govern.
4. Any issue related to usage safety shall be the liability of the user in the event that
the product is not set up properly according to requirements described in the
instruction manual.
Screw×2
53