Advertisement
Insert the wheel into the fork and replace the hook washers onto the axle so the tab fits into the corresponding
hole, then put on flat washer and tighten the axle nuts with the provided tool.
Brake Handle Adjustment
The brake handle comes attached by the factory but you can adjust it for ease of use. To adjust the brake, use a
Philips screwdriver to loosen the screw holding the lever to the handlebars and set the brake lever distance so that
the child can easily reach it, then retighten the screw.
Brake Adjustment
Adjust the brake tension by first using the barrel adjuster on the rear of the brake. Turn counterclockwise to
loosen. Once proper tension is set tighten the lock nut clockwise to prevent barrel adjust from moving. The wheel
should spin freely but stop when lever is squeezed. When the bike is new there is a break-in period, wait until
the bike has been used for a couple of hours then try to adjust it again.
Advertisement
