Mechanical and Dismantling Instructions
Dismantling Instruction
Step3: If the tray can't open in normal way, you can make it through the instruction as below (Figure 3).
Note: Make sure to operate gently otherwise the guider would be damaged.
Step4: Dismantling Front Panel, disconnect the connectors (XP7, XP82), need release 4 snaps of Front Panel & 2 snaps
of bottom cabinet , then gently pull the Panel out from the set. (Figure 4 - Figure 6)
2-2
Detailed information please refer to the model set.
Figure 3
XP2
XP4
XP7
XP3
Figure 4
XP1
XP82