Samsung HT-H4500K User Manual page 19

Software Upgrade
For more information about this function see page
20.
Contact Samsung
Provides contact information for assistance with
your product.
Terms of Service Agreement
View the general disclaimer regarding third party
contents and services.
Reset
Reverts all settings to their defaults except for the
network. Requires that you enter your security PIN.
The default security PIN is 0000.
Network Setup
When you connect this product to a network, you
can use network based applications and functions
such as BD-LIVE and upgrade the product's software
through the network connection.
Configuring Your Network Connection
If you skipped network setup during the Initial Setup,
follow the instructions below to configure the home
cinema's network connection.
Before you begin, contact your ISP to find out if your
IP address is static or dynamic. If it is dynamic, we
recommend you use the automatic procedure below.
If it is static, you must use the manual procedure that
follows.
• Before you begin, confirm that the product is
connected to your router with a network cable.
K
Automatic
To start the configuration process, follow these steps:
1. In the Home menu, select Settings, and then
press the E button.
Select Network, and then press the E button.
2.
3. Select Wired Network Settings, and then press
the E button.
The Wired Network Settings screen appears.
HT-H4500K_30HK_30K_50K_ZN-ENG-0508.indd 19 HT-H4500K_30HK_30K_50K_ZN-ENG-0508.indd 19
Support
19
Press the + button on the Internet Protocol
4.
Setup menu.
Use $% button to select Auto, and then press
the E button.
Settings
Wired Network Settings
Display
Audio
Internet Protocol Setup
Network
IP Address
System Subnet Mask
Gateway
Language
Security
DNS
General DNS Server
Support
5. The Network function acquires and fills in the
values for IP Address, Subnet Mask, etc.,
automatically.
6. After the Network function has acquired the
network values, press the
Select Network Test, and then press E . The
7.
home cinema validates the network connection.
When it is done, press the
K
Manual
If you have a static IP address or the Automatic
procedure does not work, you'll need to set the Network
Settings values manually. You can get the Network
Settings from your Internet Service Provider (ISP).
Settings
Wired Network Settings
Display
Audio
Internet Protocol Setup
Network
IP Address
System Subnet Mask
Gateway
Language
Security
DNS
General
DNS Server
Support
1. Follow the first four steps in the Automatic
procedure, but select Manual instead of Auto in
Step 4.
- English
: Auto
0 0 0 0
:
:
0 0 0 0
:
0 0 0 0
: Auto
:
0 0 0 0
> Move " Select ' Return
RETURN button.
RETURN button.
: Manual
: 0 0 0 0
:
255 255 255 0
:
0 0 0 0
: Manual
:
0 0 0 0
> Move " Select ' Return
2014-05-08 2014-05-08 11:35:54 11:35:54