Denon AVR-S710W Owner's Manual page 159

Contents Connections
o HDMI PassThrough
Selects how this unit will transmit HDMI signals to the HDMI output in
standby power mode.
On
(Default):
Off:
Front panel Display
Playback
Transmits the selected HDMI input
through the AV receiver's HDMI output
when this unit is in standby power mode.
No HDMI signals are transmitted through
this unit's HDMI output in standby power
mode.
Rear panel
Settings
o Pass Source
Sets the HDMI connector that inputs HDMI signals when in standby.
Last:
CBL/SAT /
DVD/Blu-ray / Blu-ray /
Game / AUX /
Media Player
(Default : CBL/SAT) ：
0 "Pass Source" can be set when "HDMI Control" is set to "On" or "HDMI
PassThrough" is set to "On". ("HDMI Control" (v p. 158), "HDMI
PassThrough" (v p. 159))
159
Remote
Tips Appendix
The most recently used input source will
go into standby mode.
Pass through the selected input source.
Index