Table of Contents
Advertisement
Basic operations
Control/display component
36 SHUTTER display
37 SYNC display
38 Camera number display
39 Camera number tens display
40 Camera selection switch
41 Menu / character switch
42 Rotary selection switch
43 Red/green tally display, call switch
44 Alarm display
45 Optical alarm display
46 Iris / master pedestal lock
47 Iris lever
48 Master pedestal volume
49 Preview switch
50 Fader full switch
51 Auto iris switch
52 Iris close switch
53 Sense volume
54 Coarse volume
55 Lens extender display
56 Digital extender display
57 SD card access display
58 Zoom
59 Focus
34
(continued)
Label
SHT
SYNC
CAM No.
10-19
CAM SEL
CHARA
MENU ON/OFF
SELECT
TALLY/CALL
ALARM
OPT
IRIS/M.PED LOCK
IRIS ()
M.PED ()
PUSH PREVIEW
FADER FULL
AUTO
CLOSE
SENSE
COARSE
EXT
D.EXT
SD CARD
AW-HE38
: Supported
: Supported with some
restrictions
—: Not supported
The shutter value is fixed during
transition from SYNC.
• For 59.94p, 59.94i: 1/100
• For 29.97p: 1/100
• For 50p, 50i: 1/120
• For 25p: 1/120
The display for 7SEG will be "----"
during SYNC.
When ZOOM is selected during
MENU OFF, ZOOM adjustment is
possible using the [UP] and [DOWN]
buttons.
When FOCUS is selected during
MENU OFF, FOCUS adjustment is
possible using the [UP] and [DOWN]
buttons.
CALL is disabled.
—
—
The IRIS value cannot be displayed
for 7SEG.
—
—
—
Used for ZOOM/FOCUS SPEED
adjustment.
—
—
The indicator lights when the Zoom
Mode is set to "D.Extender".
When ZOOM is selected, ZOOM
adjustment is possible using the
[UP] and [DOWN] buttons.
When FOCUS is selected, FOCUS
adjustment is possible using the
[UP] and [DOWN] buttons.
Remarks
Advertisement
Table of Contents
