User2; Manual Wb (Manual White Balance); Push Lock - Okina SET-7680 User Manual

4.4.4 USER2

The gain values for the outdoor fixed mode are used as the adjustment
items of USER2 WB on the internal OSD menu.
Function
B-GAIN
R-GAIN
B-GAIN
Used for operating the B gain in the WB fixed gain mode.
R-GAIN
Used for operating the R gain in the WB fixed gain mode.

4.4.5 MANUAL WB (Manual White Balance)

The B and R gain values for manual WB are set on this screen.
Function
LEVEL
LEVEL
Select to set the B and R gain values for MANUAL WB.
By incrementing or decrementing the B gain value, the R gain value is
also adjusted in tandem.
NOTICE:
The actual variable range is limited to the range from the low color temperature
(approx. 1800K) to the high color temperature (approx. 10500K) stored when the
pre-white balance was adjusted.

4.4.6 PUSH LOCK

To find the optimal setting for the current luminance environment in this
mode, point the camera towards a sheet of white paper and press the
ENTER button.
Whenever the condition changes, readjust it.
ATTENTION:
The white balance can not fully function under the following conditions. Please select
PUSH LOCK Mode when the following occurred.
< When there's a higher temperature surrounded the object.
< When there's darkness surrounded the object.
< When there's a fluorescent light surrounded the object or where the light changes all
the time.
Copyright © 2010. All Rights Reserved.
www.okinausa.com
Option
000-255
000-255
Option
000-255
15 REV122010-V17