Page 1
CVC500AH Series Installation and Operation Guide Please read this guide carefully before use and keep it for future reference. Remember to complete and mail the owner registration form. (Installer - Please give this manual to the user of this product after your use.)
INTEC’s products are specifically designed read and understand these instructions carefully. If to enhance vehicle safety. Use of an INTEC display you have any questions or concerns, please do not to view video in any manner other than intended...
When installing the system be sure use. If they are covered with snow to use only INTEC supplied brackets. and/or ice, it should be cleared off The Car Vision camera must be ®...
Description Specifications Product Overview The CVC500AH series cameras are designed to be Pick Up Element: 1/3” CCD waterproof and are rated to IP68 against water intrusion. They have also been designed to operate Pixel Count: 510 (H) x 492 (V) in a variety of mobile applications.
If you have any questions regarding the surface is plastic, support braces may be required. proper installation or operation of your Car Vision® System please call INTEC @ 800-468-3254 (west) 2. Once you have located the preferred mounting or 800-522-5989 (east)
If you feel the environment in which the cable is exposed is extremely harsh, you can route the cable through a conduit or consult INTEC about our optional application cable harnesses for extreme temperature or environmentally challenging applications.
For XL cables with over molded back shells the arrow with the INTEC logo is inline with the main (top) alignment key. When making a connection, align the arrow on the...
The same method is used for the CVC500AHXL How to Change Your Image INTEC’s CVC Series cameras are set as default at the factory to display a mirror image when used with our CVD or CVM Series displays and monitors.
Check voltage on the red power wire to see if camera is the only way to prevent it from happening sufficient power is reaching the controller. again. The camera should be returned to INTEC for voltage may cause the picture to blur or darken. service.
Customer Service Department the product to INTEC for service. 4256 State Route 51 North Belle Vernon, PA 15012 First, call INTEC’s Customer Service Department at Attn:RMA_______________ either our Western Office (800) 468-3254 or our Make sure to package your Car Vision unit carefully Eastern Office (800) 522-5989.
Card. Any information you provide on the Card is for INTEC’s internal use only. Our customer list is not sold or given to any other organizations unless required under State or Federal laws.
Why did you decide to purchase the Car Vision® System? How can we improve our product or service? Mail Registration to: INTEC Video Systems, Inc., 23301 Vista Grande, Laguna Hills, CA 92653. You may also fax it to us at (949) 859-3178 or complete it online by visiting www.intecvideo.com/registration.pdf...