S2Konnect N-3020SX User Manual

1000base-sx dual port server adapter, pcie x4, 2 fiber lc

Advertisement

Quick Links

Advertisement

Table of Contents
loading

Summary of Contents for S2Konnect N-3020SX

  • Page 2 S2Konnect N-3020SX 1000Base-SX Dual Port Server Adapter, PCIe x4, 2 Fiber LC User Manual S2Konnect N-3020SX...
  • Page 3 Copyright © S2Konnect GmbH, 2010. All rights reserved. This manual refers to the S2Konnect N-3020SX 1000Base-SX Dual Port Server Adapter, PCIe x4, 2 Fiber LC. Contents are subject to change without notice. Product and brand names are (registered) trademarks of their appropriate owners.
  • Page 4: Conventions

    Used to indicate a potentially hazardous situation which, if not avoided, could result to a da- mage to your eyes. Example: laser light.  Used to indicate a potentially hazardous situation which, if not avoided, may result in minor or moderate injury. Example: electrostatic discharge. Used for additional information and advice. S2Konnect N-3020SX...
  • Page 5: Table Of Contents

    Loopback Wrag Plug Test 7 Troubleshooting 8 Important Information Technical Support Returning an Adapter for Repair Additional Documentation and Updates Technical Specifications Appendix A. License and Warranty Information The Americas, Asia, Australia, New Zealand, Pacific Europe Deutschland, Schweiz, Österreich, Lichtenstein S2Konnect N-3020SX...
  • Page 6 Table of Figures Figure 1: Insertion of the adapter into the computer Figure 2: Connection of fiber-optics cables/plugs Figure 3: Possible network configurations / connection options Figure 4: Location of the LEDs Figure 5: Setup for loopback wrap plug testing S2Konnect N-3020SX...
  • Page 7: Safety Precautions

    Avoiding damage  Electrostatic discharge! Electrostatic discharge may damage or destroy the Network adapter. To avoid damaging the S2Konnect N-3020SX Dual Port Server Adapter observe the following: • Switch off the computer. • Disconnect the power cord from the power outlet.
  • Page 8 For the N-3020SX adapter, observe the following: Laser light! Laser light from fiber-optic transmission cables and components can damage your eyes. The laser components on the network adapter are Class 1 laser components. Class 1 lasers are considered incapable of producing radiation levels during normal operation or maintenance and are, therefor, determined to be eye-safe.
  • Page 9: Introduction

    Thank you for purchasing a S2Konnect product. This document describes the installation of the network adapter card. The N-3020SX is a PCIe x4 adapter which must be installed in a PCIe x4 slot of the computer. The adapter contains a Network chipset “Marvell 88E8062“...
  • Page 10: Figure 1: Insertion Of The Adapter Into The Computer

    Figure 1. Insertion of the adapter into the computer S2Konnect N-3020SX...
  • Page 11: Connection Of The Network Adapter

    4 Connection of the Network Adapter This chapter describes the physical connection of the S2Konnect N-3020SX Network Adapter to the network. Transmission Distances Depending on the physical media (cable), different distances can be reached for transmission with the Gigabit Ethernet adapter.
  • Page 12: Figure 2: Connection Of Fiber-Optics Cables/Plugs

    Refer to drivers “Read me“ or manuals for driver installation. You will find a list of available drivers at: http://www.marvell.com > SUPPORT > > CHOOSE A PLATFORM > > SEARCH > > ACCEPT AND SUBMIT > > DOWNLOAD THE ARCHIVE ON A ZIP FILE The chipset you have to select is: “88E8062” S2Konnect N-3020SX...
  • Page 13: Hardware Features

    5 Hardware Features The S2Konnect N-3020SX 1000Base-SX Adapter, PCIe x4 constitutes a follow-up model of the SK-9E82 Adapter family. S2Konnect N-20x0x and N-30x0x and the SysKonnect SK-9Exx/SK-9Sxx Gigabit Ethernet Adapter Familiy defines a series of network interfaces that combine server and workstation computers with the high-speed Gigabit Ethernet network (1000 Mbit/s) using fiber-optic and copper cables.
  • Page 14: Led Displays

    LEDs. Figure 4. Location of the LEDs The LEDs of the fiber adapters have the following meaning: Marking on Color Status Description bracket 1000/LINK green ON/OFF Link up/Link down, Speed 1000 Mbit/s green ON/OFF Receiving/Transmitting Not Receiving/Not Transmitting S2Konnect N-3020SX...
  • Page 15: Testing The Network Adapter

    Loopback testing via external repeater requires another adapter installed in a second computer running in repeater mode (also see section “Loop back Repeater Test“). The following procedure describes the test via wrap plug. Loopback wrap plug Figure 5. Setup for loopback wrap plug testing S2Konnect N-3020SX...
  • Page 16 From the main menu of the diagnostics program, select one of the following: DIAGNOSTICS for the simple test (no loopback) • LOOPB. WRAP PLUG for the loopback test • LOOPB. PORT TO PORT for the port-to-port test (only with dual port adapters) • LOOPB. EXT. REPEATER for the loop back repeater test • S2Konnect N-3020SX...
  • Page 17: Troubleshooting

    Is the maximum transmission distance exceeded (see page 11)? If you have any other S2Konnect adapter installed, compare your setup with this adapter. If the problem persists, you can analyze the status of the network adapter with the aid of the LEDs and the diagnostics programs.
  • Page 18: Important Information

    Additional Documentation and Updates S2Konnect maintains a site on the World Wide Web where you can find the latest information on our product range and our customer support services. The latest drivers are provided on the Marvell web site.
  • Page 19: Technical Specifications

    N-3020SX - 1000Base-SX Dual Port Server Adapter, PCIe x4 , 2 Fiber LC Product Highlights PCI Low Profi le (Bracket included) Sensors for Temp. and Voltage TCP Segmentation (large send) Compatible to SysKonnect SK-9E82 Features Parity check on all data path...
  • Page 20 N-3020SX - 1000Base-SX Dual Port Server Adapter, PCIe x4 , 2 Fiber LC Driver X86 : Windows Server 2008 R2, Windows Server 2008 SP2, Windows 7, Windows Vista, Windows XP, Windows 2000, Windows 2003 (.Net), Windows Server 2003, NT4, Windows98 SE, ME x64 : Windows Server 2008 R2, Windows Server 2008 SP2, Windows 7, Windows Vista, Windows XP, Windows 2000, Windows 2003 (.Net), Windows Server 2003...
  • Page 21 N-3020SX - 1000Base-SX Dual Port Server Adapter, PCIe x4 , 2 Fiber LC ROHs RoHS compliant Power Consumption Single port : @ +3.3V / VCC: max. 0.9 A / 3 W @ +3.3V(aux): max. 375 mA Dual port : @ +3.3V / VCC: max. 1.8 A / 6 W @ +3.3V(aux): max. 375 mA Dimension 118.4 mm x 68.94 mm (without Bracket)
  • Page 22: Appendix A. License And Warranty Information

    S2Konnect’s entire liability and your exclusive remedy shall be, at S2Konnect’s option, either return of the price paid, or repair or replacement of the SOFTWARE or HARD- WARE that does not meet S2Konnect’s Limited Warranty and which is returned to S2Konnect GmbH with a copy of your receipt. This Limited Warranty is void if failure of the SOFTWARE or HARDWARE has resulted from accident, abuse, or misapplication.
  • Page 23: Europe

    S2Konnect’s entire liability and your exclusive remedy shall be, at S2Konnect’s option, either return of the price paid, or repair or replacement of the SOFTWARE or HARD- WARE that does not meet S2Konnect’s Limited Warranty and which is returned to S2Konnect with a copy of your receipt. This Limited Warranty is void if failure of the SOFTWARE or HARDWARE has resulted from accident, abuse, or misapplication.
  • Page 24: Deutschland, Schweiz, Österreich, Lichtenstein

    Weitere Beschränkungen Sie dürfen die Software oder Hardware weder vermieten noch verleihen, aber Sie dürfen die Rechte aus diesem S2Konnect Lizenzund Kaufvertrag auf Dauer auf einen an- deren übertragen, vorausgesetzt, dass Sie alle Kopien der Software und das gesamte schriftliche Begleitmaterial übertragen und der Empfänger sich mit den Bestimmungen dieses Vertrages einverstanden erklärt.

Table of Contents