Removing The Speaker; Removing The Wireless Module - Panasonic CF-29C3KGZ1M Service Manual

12.6. Removing the Speaker

HEAT Pipe Unit
Bottom
<K>
<K>
1. Remove the three Screws. <J>
2. Remove theSpeaker.
3. Remove the two Screws. <K>
4. Remove the Heat Pipe Unit Bottom
5. Remove the four Screws. <L>
6. Remove the MP Eject Lerver.
7. Remove the two Screws. <M>
8. Remove the MP Eject Bousui Plate.
Screw<J>: DXQT26+D3ZLT
<K>: DXQT26+D3ZLT
<L>: DXYN26+F5NLT
<M>: DXSB26+4FZLT

12.7. Removing the Wireless Module

Wireless Module
Main PCB
1. Disconnect the Cable from Connector (CN2).
2. Remove the Wireless Module.
<L>
<L>
<L>
<L>
MP Eject
Lever
MP Eject BOUSUI
<M>
Plate
<M>
<J>
<J>
<J>
Speaker
Bottom Cover
Figure 6
to Connector
(CN2)
to Connector
(CN952)
Connector CN2
Figure 7
12.8. Removing Main PCB, EXT
Antenna and RTC Battery
Connector CN51
(front side)
<N>
Connector CN54
(front side)
<O>
Nain PCB
Connector CN4
(reverse side)
to Connector
(CN4)
RTC Battery
to Connector
(CN51)
to Connector
(CN54)
1. Remove the two Screws. <N>
2. Remove the seven Screws. <O>
3. Remove the five Screws. <P>
4. Disconnect the six Cables from six Connectors.
(Main PCB:CN6,CN9,CN10,CN51,CN54)
(EXT Antenna:CN1)
5. Remove the EXT Antenna.
6. Remove the Main PCB.
7. Disconnect the Cable from Connector. (CN4)
8. Remove the RTC Battery
Screw<N>: DFHE5118ZA
<O>: DFHE5025XA
<P>: DFHE5058ZA
24
EXT Antenna PCB
Connector
CN1
Connector CN6
(reverse side)
<N>
<O> Connector CN9
<O>
(reverse side)
<O>
<O>
<O>
<O>
Connector CN10
(front side)
Connector CN1
(reverse side)
to Connector
(CN950)
to Connector to Connector
(CN9)
(EXT Antenna CN1)
to Connector
(CN6)
<P>
<P>
<P>
<P>
<P>
to Connector
(CN10)
to Connector
(Main PCB CN1)
Figure 8