Table of Contents
Advertisement
First Time Setup
Configure Network settings
Select the Network type
Network settings
Ethernet cable
Wireless (WiFi)
OK
Select
RETURN
Select the setting mode
Network settings
Automatic
OK
Select
RETURN
Automatic
Start connection test
Network settings
Connection test
Check Ethernet cable connection
Validate IP address
Check for IP address duplication
Check connection to the Internet
Check communication with VIERA CAST server.
Test in progress...
RETURN
Complete "Network settings"
Helpful information is displayed when you
successfully complete "Network settings".
Network settings
Network settings are complete.
You can use VIERA CAST.
VIERA CAST lets you enjoy Internet
contents on your VIERA TV.
OK
RETURN
Press to return to
the previous screen
About wireless LAN
Wireless LAN adapter and Access point need to be obtained separately.
For the latest information on applicable LAN adapters, check the following website:
http://panasonic.jp/support/global/cs/tv/
Check that the Access point supports WPS*.
(If it does not support WPS, the encryption key of the Access point is required when configuring settings.)
Follow the instructions on the Access point setup screen and configure the appropriate security settings.
For more details on setting of Access point, please refer to operating manual for the Access point.
We recommend using 11n (5 GHz) for the wireless system between the wireless
LAN adapter and Access point.
Communication is also possible with 11a, 11b, and 11g (2.4 GHz), but the
communication speed may be slower.
If the wireless system of the Access point is changed, devices that could connect by
wireless LAN may no longer be able to connect.
When VIERA CAST or other device is using the network, do not disconnect the
wireless LAN adapter.
Keep the TV away from the following devices as much as possible:
Wireless LAN, Microwaves, and other devices that use 2.4 GHz and 5 GHz signals.
Otherwise, the TV failures such as malfunction may occur due to the radio wave interference.
* WPS: Wi-Fi Protected Setup
16
(Continued)
Set later:
Go to
6
Step 5 of 6
You can set in "Setup" menu later.
Set later
Wireless (WiFi): Start "Wireless network" (p. 17)
LAN
Selects Ethernet cable or wireless network. If
you select "set later" and want to repeat the
Network settings, select "Network settings" in
the Setup Menu.
Automatic: Press OK to start setup automatically.
Error screen is displayed when
Step 5 of 6
Network connection has failed.
Manual:
Go to Manual setting.
Manual
Checks for proper network connection,
settings and communication to the Internet
and server automatically.
Manual
Manual setting
Step 5 of 6
Network settings
Connection test
IP setting mode
Automatic
IP address
192.168.0.4
Subnet mask
255.255.255.0
Default gateway
192.168.0.1
DNS setting mode
Automatic
Primary DNS
192.168.0.1
Secondary DNS
221.184.25.249
Proxy address
Proxy port
Connection
Connect test
Mac address
00-00-aa-cc-33-ab
Select
error
Change
RETURN
Manual
Error screen
Network settings
Connection test
Check Ethernet cable connection
Validate IP address
Check for IP address duplication
Check connection to the Internet
Check communication with VIERA CAST server.
Connection to local network (router) failed.
Ensure wireless network availability
Retry
Manual
Try again?
Press OK to continue.
OK
Checks for proper network connection,
Select
settings and communication to the Internet
RETURN
and server.
Retry: Go to "Start connection test"
Set later: Go to
Step 5 of 6
Step 5 of 6
Set later
Press to return to
the previous screen
Adjust the Clock (Set clock)
Select NEXT then press OK to go to the next step.
Manual setting
select
Set clock
Step 6 of 6
Mode
Manual
set
or
Year
- - -
Month
- - -
Day
- - -
Hour
- - -
Minute
- - -
Time zone
DST
Next
Current year.
Select
Edit
0
-
9
Change
RETURN
Auto setting
Set clock
Step 6 of 6
Mode
Auto
Year
Month
Day
Hour
Minute
Time zone
EST
DST
Off
Next
Select
Change
RETURN
Manual: Adjust the clock manually (Year/Month/Day/Hour/Minute)
Mode
Auto: The clock is adjusted automatically via Internet service. Only
available when the TV is on a network. -->Set "Network settings" first.
Time zone Select your time zone. (EST/CST/MST/PST/AKST/HST/NST/AST)
Set DST (Daylight Saving Time) setting. (On/Off)
DST
On: Advances the clock one hour from the time it is set according to the time
zone.
Complete First time setup
Completion message is displayed when you have successfully completed the
First time setup.
Setup is complete.
Enjoy your Panasonic VIERA TV.
OK
Press OK to exit.
RETURN
Wireless network (First time setup) in
Display "Wireless network"
Select the connection method
select
Wireless network
Wireless network
Please choose a connection method.
Please choose a connection method.
OK
WPS (Wi-Fi Protected Setup using push button)
Search for wireless networks
Other
WPS (Wi-Fi Protected Setup using PIN number)
Manual settings
Follow the directions on screen to complete the setting.
See page 41 for more information.
DST
Minutes
10
OK
0
9
RETURN
Follow the instructions on
screen to complete the
following operations.
select
OK
17
Advertisement
Table of Contents
