LG WFT1771DD Owner's Manual page 39

SmartDiagnosis
Close the washer door, and press the POWER button.
Place the phone to SmartDiagnosis
2
Tub Dry
3
Long press
4
Hold the phone while data is transmitted.
5
After the data transmission is completed, listen to the diagnosis result from the consultant.
NOTE
Smart Diagnosis is a troubleshooting feature designed to assist, not replace, the traditional method of
troubleshooting through service calls. The effectiveness of this feature depends upon various factors,
including, but not limited to, the reception of the cellular phone being used for transmission, any
external noise that may be present during the transmission, and the acoustics of the room where the
machine is located. Accordingly, LG does not guarantee that Smart Diagnosis would accurately
troubleshoot any given issue.
TM
button to activate smart diagnosis.
• If you manipulated other button or dial before
pressing Tub Dry button, turn off the power
and start again from the beginning.
TM
display.
• Make sure that the
speaking side of the
phone to face
TM
SmartDiagnosis
display
• Place the phone near the
TM
SmartDiagnosis
display, and long press
Tub Dry button
until tak tatk tak sounds.
• Keep placing phone to SmartDiagnosis
display while data for smart diagnosis is being
transmitted. The time remaining for data
• Transmission sound may be irritating. For
transmission will be displayed on screen.
proper diagnosis, do not take off the phone.
You can press power button to stop diagnosis
function and the sound.
• When data transmission is completed, the
power is automatically turned off with "End"
display after a few seconds.
TM