Placing And Leveling - LG T2517SSAV Owner's Manual

Placing and Leveling

Please ensure that transit restraint has been removed before operating your machine.
We suggest a minimum clearance of 2 cm to the
Place the machine on a flat and firm surface which allows proper clearance.
right side and left sides of the machine for ease of
installation.
At the rear, a minimum clearance of 10 cm is sug-
gested.
NOTE
If the washer is installed on a uneven,weak or tilted floor causing excessive vibration,
spin failure or "UE" error can happen to it.
It must be placed on a firm and level floor to prevent spin failure.
2
Open the lid and look from above to see if it is
Make sure that the washer is properly Level
same as shown.
3
Lift the front of the washing machine and twist
Leveling the machine
the Adjustable Leg until the surface bubble is
placed in the center.
※ Installing the Anti-Rat Cover (option) Insert the anti-rat cover to be firmly fixed from the back or
front of washing machine and screw it
Caution
If the power is supplied from a cord extension set or generator, the cord extension set or electrical
portable outlet device should be positioned so that it is not exposed to splashing or ingress of moisture.
30
BACK
more than 10 cm
more
than
2 cm
Top view of the machine
BACK
Adjustable legs
SETTING SCREW
BACK
BACK
ANTI-RAT COVER
more than
2 cm
SETTING SCREW
ANTI-RAT COVER
SETTING SCREW
SETTING SCREW
ANTI-RAT COVER
ANTI-RAT COVER