Toro 74395 Operator's Manual page 29

4. Stop the engine, remove the key, and wait for all moving
parts to stop before leaving the operating position ().
1
3
6
8
Changing the Engine Oil
Service Interval: After the first 8 hours—Change the engine
oil.
Every 100 hours—Change the engine oil. (more often
in dusty, dirty conditions)
Note: Dispose of the used oil at a recycling center.
1. Park the machine so that the drain side is slightly
lower than the opposite side to assure the oil drains
completely.
2. Disengage the PTO, move the motion control levers to
the neutral locked position and set the parking brake.
3. Stop the engine, remove the key, and wait for all moving
parts to stop before leaving the operating position ().
2
4 5
7
9 10
Figure 34
1
3
5
G0201 15
29
2
4
6
G0201 16
Figure 35