Do not use water spray and steam to clean the
Clean the appliance with a moist soft cloth. Only
use neutral detergents. Do not use abrasive
products, abrasive cleaning pads, solvents or
WARNING! Risk of injury or
CAUTION! Before use all parts of the
transport packaging must be removed.
Open loading door.
Pull off adhesive strips from inside machine on top of drum.
Remove foil hose and polystyrene padding from the machine.
As to the outlet itself, if you have
decided on a install wall/window grille,
a good local builder's merchant can
supply you with the necessary fittings
and installation advice.
Make sure that the vent hose length is
less than 2 m, and that it contains no
more than 2 bends.
WARNING! It is important not to
connect the vent hose to, for example,
a cooker hood, or a chimney or flue
pipe designed to transmit the exhaust
from a fuel burning appliance.
Disconnect the appliance from the mains
Cut off the mains cable and discard it.
Remove the door catch to prevent children and
pets to get closed in the appliance.
Note that to prevent condensation problems, it is
essential that the dryer be installed with the flexible
hose to transmit its "exhaust" at least beyond the
kitchen units; preferable outside the kitchen. In
order to prevent the appliance from overheating, it
is important that the steam exhaust is unobstructed.
Thus, if a permanent hose installed to an external
wall or ceiling, it must be ensured an exhaust
capacity of minimum 150 m3/h. If the dryer is
installed adjacent to kitchen units, make sure that
the vent hose is not squashed. If the hose is not
fully squashed, drying efficiency will be decreased ,