Connecting The Headphone System - Acoustic Research AW721 Installation And Operation Manual

II. Connecting the Headphone System
I. Powering the Transmitter
Connect the small, round plug from the transmitter AC power adapter (O) to
the transmitter power input jack (K) and plug the other end of the transmitter
AC power adapter (O) into any standard 120V AC wall outlet.
Transmitter
K
II. Connecting to an Audio Source:
i. Connecting to an A/V Receiver:
Transmitter
Audio Input Cable (L)
ii. Connecting to a TV:
Transmitter
Audio Input Cable (L)
3
120V AC
wall outlet
AC Power
Adapter (O)
A/V Receiver
Audio Output
"Y" adapter cable (P)
TV
Audio Output
"Y" adapter cable (P)
Note:
There is no transmitter ON/OFF
switch. The transmitter is designed to
be left plugged in and powered at all
times. If you do not intend to use the
AW721 for an extended period of
time, you may wish to unplug the
transmitter AC power adapter.
1. Connect the included "Y" adapter
cable (P) to the audio input cable
(L) coming out of the transmitter.
2. Connect the left (white) and right
(red) audio plugs on the "Y"
adapter cable to the corresponding
left and right audio outputs of your
A/V receiver, amp or other audio
source.
1. Connect the included "Y" adapter
cable (P) to the audio input cable
(L) coming out of the transmitter.
2. Connect the left (white) and right
(red) audio plugs on the "Y" adapter
cable to the corresponding left and
right audio outputs on the TV.