Alignment Instructions - Sanyo LED-42XR11F Service Manual

Adjustment Instruction
1 Safety Instructions
1.1 Power supply must be cut off when replacing or welding any component or inserting / pulling out
connective lines;
1.2 Anti-electrostatic measures must be carried out during the whole producing processes!
a) Do not touch IC by hands at will;
b) Use anti-electrostatic iron;
c) Welder must wear anti-electrostatic glove;
1.3 Replacing any component with special safety requirement must refer to component list without
changing its specification and model at will.
2 Adjustment Equipments
Multimeter or osciillograph
VG-849
CA-21
USB
DVD (included HDMI 1.4) or equipments with the same functions
3 Adjustment Processes
3.1 Power voltage test
According to the wiring diagram specified by "Product Specification", connect power board
assembly, data processing assembly, IR/Key board assembly, backlight board assembly correctly,
supply with power, press button
Test voltage of socket X601 each pin on the main board. Voltage value and range are listed as
Table 1:
X601 Pin1,2
Voltage 24V±5%
Function AMP_PWR
to power on the TV set.
Table 1 Voltage of X601 each pin
3,4 5,6 7,8
12
0 0
V±5%
+5V
GND GND
STB
9 10 11
5
≤5.2V
V±5% V±5%
Main +5V
PWR_SW
5V STB
12 13
5
≤5.2 V ≤5.2 V
BL_PWM BL_ON