Miele B 2312 Operating Instructions Manual page 51

Finishing the descaling process
The residual water container may be hot after rinsing.
^ Remove and empty the residual water container.
^ Rinse out and dry the residual water container thoroughly.
Make sure that the metal contact discs at the top of the
residual water container are cleaned and dried properly
The residual water container can be cleaned in the
dishwasher or by hand, using hot water with a little
washing-up liquid.
^ Replace the residual water container after a short interval
(approx. 20 seconds) so that it clicks into position.
The 2 indicator light will go out now.
The k indicator light goes out as well and the appliance
switches off.
The iron or the steamer can now be reconnected to the steam
connection.
Switch on using the s button. The appliance is now ready to
use again when it has heated up.
Cleaning and care
51