Care And Cleaning - Black & Decker CM2036 Manual

Thermal programmable 12-cup coffee maker
Hide thumbs Also See for CM2036:
Table of Contents

Advertisement

Available languages

Available languages

6.
Press ON/OFF button once to
begin brewing.
7.
The Sneak-A-Cup™ feature allows
you to pour a cup of coffee before
the brewing cycle is complete.
The carafe must be placed
back into the coffeemaker within
20 seconds to prevent overflow.
Replacing the carafe will restart the
brewing process.
8.
Brew timer will begin when
brewing cycle is complete.
9.
Press thumb tab on carafe lid to
pour coffee.
10. To turn off the coffeemaker at any
time press the ON/OFF button.
11.
When coffee grounds are cool,
carefully remove and throw away
used grounds and filter.
12. Clean the thermal carafe and
washable brew basket according
to the instructions in the CARE
AND CLEANING section.
C A RE A N D CLE AN IN G
Cleaning your coffee maker, following the directions below is recommended
after every use. This product contains no user serviceable parts.
Cleaning
1.
Make sure your coffeemaker is unplugged and cool.
2.
Open the coffeemaker cover. Remove the brew basket. Throw away the used
paper filter and coffee grounds.
3.
Wash the brew basket and carafe by hand in warm, soapy water.
4.
Wipe the outside of the coffeemaker, power cord and carafe plate with a
soft, damp cloth.
5.
To clean the inside of the cover, open the cover and leave in the open position;
wipe surfaces with a damp cloth.
Note: Do not use abrasive cleansers or scouring pads, and never immerse the
coffeemaker in water.
12

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents