Download Print this page

NETGEAR WNDAP620 Installation Manual page 2

Prosafe 3x3 single radio dual band wireless-n access point
Hide thumbs Also See for WNDAP620:

Advertisement

Available languages

Available languages

  • ENGLISH, page 1
ProSafe 3x3 Single Radio Dual Band Wireless-N Access Point
WNDAP620
Package Contents
Unpack the box and verify the contents:
ProSafe 3x3 Single Radio Dual Band Wireless-N Access Point WNDAP620
Straight through Category 5 Ethernet cable
Power adapter and cord (12V, 1.5A)
Ceiling mount kit
Installation Guide
Resource CD, which includes link to the Reference Manual
Set Up the Access Point
Follow these instructions to set up your wireless access point. Before proceeding
with the WNDAP620 installation, familiarize yourself with the contents of the
Resource CD. See the Reference Manual for instructions on advanced
configuration options.
Tip: Before mounting the access point in a high location, first set up
and test the unit to verify wireless network connectivity.
1. Connect the wireless access point to your computer.
a. Prepare a PC with an Ethernet adapter. If this PC is already part of your
network, record its TCP/IP configuration settings. Configure the PC with a
static IP address of 192.168.0.210 and 255.255.255.0 as the subnet mask.
b. Connect an Ethernet cable from the access point to the PC (point A in the
illustration).
English
1

Advertisement

loading