Beamz Atlas LED Double Derby DMX 6x3W Instruction Manual page 8

Signal terminator.
A DMX signal terminator is recommended to avoid a bad signal caused by other electrical devices. A DMX terminator is a
XLR connector with a 120 resistor between pin 2 and pin 3 of the XLR connector. Connect it to the last OUTPUT socket
of the final light.
See picture:
IN OUT
Specifications
Power 35W
No. of LEDs 6 x high power LED's
Lamp 6 x 3W LED units (R2,G2,B2)
Power Supply 220V/110V, 50/60Hz
Dimensions 430 x 400 x 280 mm
Weight 5.7 KG
IN OUT
www.tronios.com
Copyright © 2012 by TRONIOS the Netherlands
IN OUT
120Ω